test bank contains questions pertaining to
Clearances and Procedures
. The following list contains only a relatively small percentage of the pertinent
questions. Our software, which you are free to download now at no cost, will
generally contain a much more complete set of questions associated with this
test bank. This list is intended only to familiarize you in a general way with
the questions of the
FAA Written Test Prep Software
That said, while the following questions are intended
as a general familiarization tool, this list may not be up-to-date nor accurate.
We do not update this website as often as we update our software, which will
contain at any moment all questions that we have for a given test / topic. Therefore,
if you need to actually study for your test, instead of using the list below,
we strongly, strongly encourage you to download our GroundSchool
written test prep software. Not only is it more complete and more up to date,
but it also includes answers and explanation and has many features to make your
study fast and efficient.
from the FAA
(Refer to figure 46.)
What are the hours of operation (local time) of the ATIS for the Yakima Air Terminal when daylight savings time is in effect?
- When departing from an airport not served by a control tower, the issuance of a clearance containing a void time indicates that
- During a takeoff into IFR conditions with low ceilings, when should the pilot contact departure control?
- During a flight, the controller advises 'traffic 2 o'clock 5 miles southbound.' The pilot is holding 20° correction for a crosswind from the right. Where should the pilot look for the traffic?
- Which procedure should you follow if, during an IFR flight in VFR conditions, you have two way radio communications failure?
(Refer to figure 113.)
You receive this ATC clearance:
"...CLEARED TO THE ABC VORTAC. HOLD SOUTH ON THE ONE EIGHT ZERO RADIAL..."
What is the recommended procedure to enter the holding pattern?
(Refer to figure 116.)
You arrive over the 15 DME fix on a heading of 350°. Which holding pattern correctly complies with the ATC clearance below, and what is the recommended entry procedure?
"...HOLD WEST OF THE ONE FIVE DME FIX ON THE TWO SIX EIGHT RADIAL OF THE ABC VORTAC, FIVE MILE LEGS, LEFT TURNS..."
- While flying on an IFR flight plan, you experience two-way communications radio failure while in VFR conditions. In this situation, you should continue your flight under
- In which airspace is VFR on Top operation prohibited?
- When are you required to establish communications with the tower, (Class D airspace) if you cancel your IFR flight plan 10 miles from the destination?
- If during a VFR practice instrument approach, Radar Approach Control assigns an altitude or heading that will cause you to enter the clouds, what action should be taken?
- What does declaring 'minimum fuel' to ATC imply?
- Which procedure applies to instrument departure procedures?
- A 'CRUISE FOUR THOUSAND FEET' clearance would mean that the pilot is authorized to
- What is the rule for a pilot receiving a "Land and Hold Short Operation (LAHSO) clearance?"
list above contains 1/4 or less of the actual number of questions
and may not be up to date! Download the software today to get
access to all available questions.
more information about the
test bank, click here.
Content, and Accuracy Notice: the questions presented here and the organization
thereof include both elements whose copyright status is consistent with that
of many US government publications and elements whose copyright status is vested
in Dauntless Software, a private concern. Dauntless Software grants visitors
permission to use the contents of this page for personal use - commercial or
public use, including collecting (or harvesting) of any data or material on
this page is strictly prohibited. This material is presented for informational
purposes only and may be in error. Dauntless Software works hard to maintain
our FAA written test question banks. If you see an error on this web page, it
is likely NOT an error that is repeated in our software, as our software (unlike
this web page) is connected to our editorial mechanism whose mission is to quickly
identify and correct errors. If you see what you believe to be an error, please
download and try our software to see if the error is repeated there. If you
believe it is, you can use the issue-reporting mechanisms within the software
to contact our editors about any concern you may have and we will be happy to
look into it promptly.